MC9S08AC60系列单片机解密优惠

MC9S08AC60系列单片机解密是橙盒科技在业内率先破解的典型单片机系列之一，橙盒科技对该系列单片机解密的成功突破使业界对MC9S08系列单片机解密的困惑走向终结，为众多解密公司及橙盒科技的代理商提供了解密技术支持与服务，也为更多的电子企业及工程师提供了全方位技术参考。

日前，为回馈广大客户长期以来对橙盒科技的支持与信任，橙盒科技面向广大客户提供MC9S08AC60系列单片机解密优惠活动，关于更多优惠细则与解密合作详情，请直接与橙盒科技联系：

MC9S08AC60系列单片机特性：

　　8-Bit HCS08 Central Processor Unit (CPU)

　　40-MHz HCS08 CPU (central processor unit)

　　20-MHz internal bus frequency

　　HC08 instruction set with added BGND instruction

　　Development Support

　　Background debugging system

　　Breakpoint capability to allow single breakpoint setting during in-circuit debugging (plus two more breakpoints in on-chip debug module)

　　On-chip in-circuit emulator (ICE) Debug module containing two comparators and nine trigger modes. Eight deep FIFO for storing change-of-flow addresses and event-only data.

　　Supports both tag and force breakpoints.

　　Support for up to 32 interrupt/reset sources

　　Memory Options

　　Up to 60 KB of on-chip FLASH memory with security options

　　Up to 2 KB of on-chip RAM

　　Clock Source Options

　　Clock source options include crystal, resonator,external clock, or internally generated clock with precision NVM trimming using ICG module

　　System Protection

　　Optional watchdog computer operating properly (COP) reset with option to run from independent 1kHz internal clock source or bus clock

　　Low-voltage detection with reset or interrupt

　　Illegal opcode detection with reset

　　Cyclic Redundancy Check (CRC) Module to support fast cyclic redundancy checks on memory.

　　Power-Saving Modes

　　Wait plus two stops

　　Peripherals

　　ADC — Up to 16-channel, 10-bit analog-to-digital converter with automatic compare function

　　SCI — Two serial communications interface modules with optional 13-bit break. supports LIN 2.0 Protocol and SAE J2602; Master extended break generation; Slave extended break detection

　　SPI — Serial peripheral interface module

　　IIC — Inter-integrated circuit bus module to operate at up to 100 kbps with maximum bus loading; capable of higher baudrates with reduced loading. 10-bit address extension option.

　　Timers — Up to two 2-channel and one 6-channel 16-bit timer/pulse-width modulator (TPM) module:Selectable input capture, output compare, and edge-aligned PWM capability on each channel.Each timer module may be configured for buffered, centered PWM (CPWM) on all channels

　　KBI — Up to 8-pin keyboard interrupt module

　　CRC - Hardware CRC generation using a 16-bit shift register

　　Input/Output

　　Up to 54 general-purpose input/output (I/O) pins

　　Software selectable pullups on ports when used as inputs

　　Software selectable slew rate control on ports when used as outputs

　　Software selectable drive strength on ports when used as outputs

　　Master reset pin and power-on reset (POR)

　　Internal pullup on RESET, IRQ, and BKGD/MS pins to reduce customer system cost

　　Package Options

　　64-pin quad flat package (QFP)

　　64-pin low-profile quad flat package (LQFP)

　　48-pin quad flat pack no lead package (QFN)